Free Samples - Order 3 Free Flooring Samples
Got A Quote? Click Here To Redeem
Manchester Showroom In-store Stock Now Available
  • This product is a massive 20mm in thickness. This will enable you to sand and reseal on many occasions for both solid and engineered floors.
  • This product has a 4-sided v-groove which helps define the width and length of each individual board. This helps give the laminate a more natural look, and makes it increasingly hard for people to tell the difference between laminate and solid wood flooring.
  • BCD Grade is also known as a rustic grade. A rustic grade contains knots, sapwood and filler use. The degree of these features vary throughout ever product as it is natural. If you prefer cleaner looking products with little or no filler use or colour variations alternative products with AB Grading or Prime grading are available to purchase on our website.
  • This particular product measures 1900mm in length by 240mm in width.
  • This product may be suitable for kitchen area use. However, we would strongly recommend that the joints are sealed with silicone if it is a flat laminate to prevent water damage to the click system of the boards, particularly around areas where water spillages maybe common i.e. the dishwasher, sink and washing machine . We would also highlight for solid and engineered wooden flooring, that in any and all areas were water or grease is present lacquered products can offer more protection than oiled products. However, if spillages occur you must clean the areas without delay to avoid damage/staining. Improper care, maintenance and cleaning of any product may not make it suitable for this area of the home. Equally if the area is subject to heavy water damage the product may be destroyed.
  • This product is fit for use in a living room. It would be recommended that any furniture in the room (i.e. sofa, television stand) has self adhesive felt pads attached so that when furniture is being moved or is knocked into, it doesn't scratch the floor. Simple and cheap methods like this can help preserve the lifespan of your floor.
  • This product is not suitable for use in a bathroom area. This is because the water use in the bathroom could end up damaging the floor. Moisture getting into the joints will lead to swelling and bowing of the boards causing them to lift up from your subfloor.
  • This product is put together via a 'tongue and groove' system. This is where the tongue of one part of the board fits into the groove along the edge of another board.

Summit Engineered Flooring 20/6mm x 240mm Oak Smoked Brushed and White Oiled 2.28m2

ENG1024
  • £52.99 per m² £120.82 Per Pack
  • RRP £78.99 per m²
Loading...
Item in StockIn Stock | Usually dispatched within 24 hours
Order within for delivery on Wednesday 23rd, August

Summit Engineered Flooring 20/6mm x 240mm Oak Smoked Brushed and White Oiled 2.28m2
Product Code: ENG1024
Species: Oak
Construction: 3 Ply
Thickness: 20mm
Wear layer: 6mm
Width: 240mm
Length: 1900mm (will contain 2 850mm starter boards)
Planks Per Pack: 5 (4 Full length and 2 850mm Starters)
Edge Detail: 4-Sided V-Groove
Pack Size: 2.28m2
Profiling: T&G
Grade: Rustic
Underfloor Heating:
Not Suitable
Installation Guide Click HERE

As our widest plank sized range, this Summit 20/6mm x 240mm Oak UV Smoked Brushed and White Oiled is a highly desirable floor.

The engineered board has a 3 ply construction which makes it an extremely durable and resilient product.

All 4 sides of each plank have a manufactured 'v-groove' edging which defines both the width and random length of each plank across your elegant floor. This accentuates every plank, making the floor far more visually impacting.

Being a natural product each board is unique in colour, mineral grain, degree of knots and sapwood. All of these natural features enhance the overall characteristics of such a beautiful oak floor.

A floor with the popular brushed finish is when the planks have been brushed with a steel comb to highlight the grain of the wood resulting in an authentic textured appearance. This floor is impregnated with an Oil Wax coating which retains the natural character of the wood while also increasing its durability.

All natural flooring products will contain a mixture of prime quality boards (no knotting), a proportion of 'first sort' (knots with filler, grain and colour variation) and 'second sort' (oak with larger knots, grain and strong colour variation). As solid and engineered wood flooring are natural products some boards may display heavy grain markings and figuring, wider colour variations and frequent knots of varying sizes and splits in which filler may be used.

This product is treated with a natural oil during the manufacturing process. We highly recommend that once fitted the product is treated with Osmo Polyx-Oil to aid in resistance to water and dirt. It is vital this process is carried out to provide a protective wax and oil barrier and maintain the integrity of the product throughout the home.

In particular, areas of high traffic and/or areas where spillages and staining may occur such as the living room, hallway dining room and kitchen should undergo this process as soon as installation occurs and it is recommended the oil is applied every 18-24 months thereafter.

(Please note, our engineered and solid wood flooring do not come with a warranty, either implicit or implied, unless stated otherwise in the product description.)

This product has not been reviewed yet.

Delivery Information

Deliveries are made on Monday - Friday between 8am to 6:30pm (Saturday between 8am- 2pm).

On the day of delivery, United Pallet Network will off-load the pallet using a tail-lift and hand operated pallet trolley.  The driver will ensure that the pallet is left in a safe place on the kerb or driveway. Please ensure you make the necessary arrangements to transport the goods into the property. 

Beading orders will be delivered by Tuffnells.

99% of our orders are delivered in perfect condition but sometimes things can go wrong in transit.

You have 15 minutes to check your goods, if you do notice any type of damage please ensure you record this on the driver’s delivery docket. We cannot accept claims for damage unless it is recorded on the delivery docket. Please also take the time to review our T&C’s.

Damage to look out for is ripped packaging, corners of the boxes, product arriving wet, and impact damage.

When your order arrives, the name on the box might be different from what you have ordered. Our suppliers don’t like us selling their flooring at such low prices so we change the name.

If a delivery is refused for any reason other than damaged goods you will be liable for the full cost of delivery and return. Re-delivery charges are incurred for failed delivery attempts.

Under no circumstances will goods be left unsigned for. 

Returns and Cancellation Policy

If you cancel your order before they have been dispatched, we will refund you the full invoice amount within 2 working days.

In the case that you do wish to return your order, you have up to 14 days to cancel on receipt of delivery, in order to receive a full refund less delivery charges. The product should be returned no later than 14 days after you have cancelled.

To cancel your order you must inform us by email, referencing the order number and stating the reason why you are cancelling it. Email customerservice@discountflooringdepot.co.uk.

It is your responsibility to arrange the items to be returned to our warehousing facility. If would wish for us to arrange collection via our courier UPN there would be an additional charge of £75.

Refunds will be issued within 5 working days of the return.

Before Returning:

• Email our customer service team stating your order number and the reason for cancelling. Email customerservice@discountflooringdepot.co.uk.

• Please ensure all products being returned are well protected before sending, as any costs for damaged goods will be taken from the refund total.

• Products must be returned in original unopened packaging.

• Ensure goods are returned on a pallet. This will minimise damages.

Manufacturing fault:

The quickest way for us to resolve a manufacturing fault complaint is for you to follow the below steps.

• Download and complete this form (click here)

• Email the form with detailed photos of the fault to customerservice@discountflooringdepot.co.uk.

• This information will be sent to the manufacturer to review.

Genuine manufacturing faults will be replaced and delivery and return costs will be refunded.

If you return a product due to installation problems and we are able to install it back at our warehouse facility, we will have no choice but to send you the product back at your expense.  We highly recommend your installer reads and fully understands the installation guide on the product prior to installation.


Discountflooringdepot.co.uk takes security seriously. We use industry-standard secure sockets layer (SSL) 128-bit encryption technology to ensure that all your personal and transactional information is encrypted before transmission.

Our robust security policies are to safeguard your privacy from unauthorised access / improper use and we will continue to implement ever-more secure technology as it becomes available.

We cannot be responsible for the privacy policies and practices of other websites. If you access partner or affiliate sites using links from our website, we recommend that you check their security policy when you visit. Wherever possible we've linked with sites that show the same commitment to security and also offer SSL encryption.

For maximum security, we ask you to choose a password to access your data on our site. Your password is unique and helps us to protect your personal information. You must keep this password safe and must not disclose it to anyone.

We have a few options for you if you forget your password or you want to change it for any reason. Simply click the link at the top right of our homepage or for more help simply email us.

Please note that communications over the Internet are not secure unless they have been encrypted, never disclose sensitive information in an email/webmail. Your communications may route through a number of countries before being delivered - this is the nature of the World Wide Web/Internet. We cannot accept responsibility for any unauthorised access or loss of personal information that is beyond our control.

Payment

The buyer of the goods must make payment in full to the seller before the goods will be dispatched. Partial payment for goods or services will not be accepted.   

Payment is accepted by Visa, MasterCard, Switch, Delta, Visa Debit, Visa Electron, Maestro. We do not accept cheques.

All payments will be processed via Sagepay unless otherwise stated.

The personal data collected whilst processing a payment will be used in full compliance with the Data Protection Act 1998 and in accordance with the published Privacy Policy.

Payments are processed at the time of order and will be deducted from your nominated payment account, if insufficient funds are available for the order to be processed your payment will be automatically declined.

We will not be liable for any additional card, bank processing fees or charges (such as refund charges or overdraft facilities or similar) incurred as a result of ordering any goods and services from us.

Top